Call Sales Free: 0800 9882434
Home » Products » CCTV Security Systems » Bosch SN Encoder

Enter your details to speak to a member of our sales team.

AlertSystems will always respect your privacy.

Bosch Video Jet X10/X20/X40 SN Video Encoder


Key features:
  1. High quality MPEG-4 video over IP
  2. Units with one, two, or four video inputs
  3. Built-in intelligence at the edge
  4. Network attached RAID storage via iSCSI
  5. Local recording on CF card or USB hard drive

Bosch Video Jet SN Video Encoder

The Bosch Video Jet X SN encoders belong to a family of high performance, single, dual, or quad input CCTV video encoders that feature DVD-like quality MPEG-4 video, at up to 30 images per second, over IP networks. The units support Pal/NTSC sources and provide bi-directional audio communication in parallel to video. They are built into a housing that can be easily wall-mounted or rack-mounted. These powerful and flexible devices represent the cutting edge of high performance video over IP for CCTV today.

View the VideoJet X SN encoder video on a PC sing a Web Browser, in the Bosch Video Management system, or integrate it into another video management system. By routing the IP video to a high performance VIP XD video decoder or a VIDOS monitor wall, you can present the video with ultimate clarity.
When one or two inputs are used, the encoders deliver MPEG-4 video over IP at a full frame rate of 25 (PAL) or 30 (NTSC) images per second with up to 4CIF resolution on every channel. If  four inputs are used, the maximumframe rate is 12.5/15 images per second at 4CIF resolution and no dual streaming is possible.
With built-in video content analysis, Video Jet X SN encoders reinforce the intelligence at the edge concept where edge devices become increasingly intelligent. The Video Jet X SN comes with built-in motion detection This motion detection algorithm is based on pixel change and includes object size filtering capabilities and sophisticated tamper detection capabilities.
Power Supply Via external unit or external battery
Input Voltage 10 to 30 VDC
Power consumption
X10: approx 11 VA, fully equipped
X20/X40: approx 19 VA, fully equipped

X10: 1 x input
X20: 2 x input
X40: 4 x input
Connector BNC
Impedance 75 ohm, switchable
Signal Analog composite, 0.7 to 1.2 Vpp, NTSC or PAl
Audio X10: 1 x mono line in, 1 x mono line out
X20/X40: 2 x mono line in, 1 x mono line out
Connector 2 x 3.5 mm stereo jack
Signal line in 9 kohm typical, 5.5 Vpp max
Signal line out 3.0 Vpp at 10 kohm/1.7 Vpp at 16 ohm typical
Alarm 4 x input
Connector Clamp (non-isolated closing contact)
Activation resistance 10 ohm max
Relay 4 x output
Connector Clamp
Signal 30 Vpp, 2A
COM port Clamp, RS-232/422/485
Standards MPEG-4, M-JPEG, JPEG
Data rates 9.6 kbps to 6 mbps per channel
Resolution Horizontal x vertical PAL/NTSC
4CIF X10/X20: 704x576/480 (25/30 ips)*
X40: 704x576/480 (12.5/15 ips* all inputs used)
2CIF 704x288/240 (25/30 ips)*
2/3 D1 464x576/480 (25/30 ips)*
1/2 D1 352x576/480 (25 ips)*
QCIF 176x144/120 (25/30 ips)*
*Depending on picture and movement 
GOP structure I, IP
Overall IP delay 120ms
Frame rate 1 to 50/60 (PAL/NTSC)
Standard G.711; 300 Hz to 3.4 Hz
Data rate 80 kbps at 8 kHz sampling rate
Ethernet 10/100 Base-T, auto-sensing, half/full duplex, RJ45
Protocols RTP, Telnet, USP, TCP, IP, HTTP, HTTPS, DHCP, IGMP V2/V3, ICMP, ARP, RTSP, SMTP, SNTP, SNMP (V1/V2c/V3 MIB-II), 802.1x
Encryption TLS 1.0, SSL, AES (optional)
Software update Flash ROM, remote programmable
Configuration Configuration manager or web browser
Compact Flash 1 x CF slot for optional standard Type I/II Compact Flash memory card
USB port 1 x USB 2.0 high-speed port, 2.5 W max feed
Dimensions (HxWxD) 33x142x178 mm (1.3x5.6x7in)
Weight Approx 0.6 kg (1.3 lbs)
Operating temperature 0ºC to +50ºC (32ºF to 122ºF) ambient temperature
Relative humidity 20 to 80% atmospheric humidity, non condensing 
Thermal value X10: 37 BTU/h max, fully equipped
X20/40: 65 BTU/h max, fully equipped