NETTUNO SENSES Cam PX exploits the potentialities of SENSES technology (‘’overall Winner’’ at IFSEC 2006), based on algorithm deepath2, for real time motion tracking and behaviour analysis. NETTUNO SENSES Cam PX becomes a powerful motion detector, capable of generating and transmitting digital video and intelligent alarms over the network.
Fitted with a revolutionary video acquisition system developed by Pixim, NETTUNO SENSES CAM PX takes advantage of a 720 x 540 pixel progressive scanning sensor that eliminates interference and a dedicated DSP that runs an advanced high resolution system, capable of delivering a maximum dynamic range of 120 dB.
The MPEG4 Main Profile algorithm implemented on board offers an ultra low noise video signal and striking detail, giving excellent quality images at full resolution (D1), while still very fluid and usable over extremely reduced bandwidths.
NETTUNO SENSES CAM PX can work as a stand alone camera, but it can also be networked with SPECTIVA and LINEARIS digital video management systems. Transmission via IP, use of the best compression algorithm, analogue video output and bi-directional stereo audio provide extremely flexible and scalable solutions for any type of CCTV installation.
It’s possible to set the type of movement to detect, based on speed, direction, shape and size of the object. Different settings are possible for multi zone handling. The system also detects slow movements.
|Overtake Alarm||For detecting a vehicle over taking another in a zone where this manoeuvre is not allowed or where the visibility is limited.|
|Bottlenecks Alarm||An event is thrown when the system detects a queue caused by a sudden brake or a car accident.|
|Travelling the wrong way Alarm||An alarm can be triggered when a vehicle is moving in the wrong direction (e.g. against the traffic flow,) endangering others.|
|Panic Alarm||Serious or dangerous situations can be marked by detecting abnormal behaviour of people when they are panicking.|
|Excessive Speed Alarm||An alarm can be given by the system when the speed of a vehicle exceeds a given limit. It’s possible to setup different zones with specific speed limits.|
|Permanence of objects and persons||An object can be detected when it stands still for a given time in a place that is being monitored for security reasons (i.e luggage in an airport, a vehicle parked in a critical zone, or an object that has been removed from its usual placement.) Alarms can be given based on the shape and size of the object.|
|Camera occlusion alarm||An alarm can be triggered when a camera is darkened, or occluded by an object that obscures or conceal landscape details.|
|Tracking alarm||The system detects the path of a moving object, vehicle or person, based on shape, size and speed. The system raises an alarm for specific paths.|
|Person Counter||It is possible to keep track of the number of people crossing a virtual line, for statistical analysis or for gathering relevant information. It is also possible to set an alarm that goes off when a specific number of people (or people per hour) cross the line.|
|Sensor type||Wide Dynamic Range – Progressive|
|Sensor array size||5.04 mm (H) x 3.78 mm (V)|
|Image Size||Diagonal 6.3mm (Type 1/3’’)|
|No of pixels (effective)||720 (H) x 540 (V)|
|Colour filter array||Primary RGB|
|Light sensitivity||0,8 lux at normal frame rate with an F=1.2 lens (colour mode) 50 IRE|
|Dynamic range||105dB typical (14 bit precision), 120dB max|
|Signal to noise ratio||Greater than 48dB (F5.6 @ 2000 lux)|
|Slow shutter mode sensitivity||Better than 0.08 lux|
|White balance||Auto tracking, manual, preset|
|Video output analog||1 CVBS (75 Ohmt) / 1 SVHS ( PAL/NTSC selectable)|
|Compression algorithm||MPEG4 Main Profile|
|Supported protocols||TCP/IP – UDP|
|Supported resolutions||D1, 2CIF, CIF, QCIF|
|Audio In||1 Stereo input|
|Audio Out||1 Stereo output|
|Power over Ethernet (PoE)||Si|
|Operating temperature||5 to 55°C|
|Relative humidity||8-90% not condensing|
|Dimensions||60W x 140D x 55H mm|