Call Sales Free: 0800 9882434
Business Security System Installation and Support.
Call Sales Free: 0800 9882434
http://www.linkedin.com/company/alertsystems-ltd https://twitter.com/alertsystems https://www.youtube.com/user/alertsystems
Call To Action

HOW CAN WE HELP?Enter your details and we’ll be in touch.

AlertSystems will always respect your privacy.
More information about our privacy policy.
Security Solutions » CCTV Systems » CCTV Archive » Dual Chip (Day/Night) Static CCTV Surveillance Camera

Dual Chip (Day/Night) Static CCTV Surveillance Camera

Dual Chip Static Camera

Colour camera in daylight, a high-sensitivity B/W camera during the night. Technical details, specification and key features of Dual Chip (Day/Night) CCTV Surveillance Camera.

Key features:

  • 1/3″ Colour CCD DSP Day/Night Camera
  • Super-High Horizontal Resolution of 520TV Lines
  • 24v AC and 12 to 15V DC dual power operation (VCC-4795P)
  • 220 to 230V, 50Hz operation
  • Auto-tracing or manual white balance selectable (Slide SW)
  • Built-in high-speed electronic shutter
  • Internal synchronisation, line-lock capability
  • Built-in electronic iris for indoor use
  • High Sensitivity – Minimum illumination of 0.45 lux (F1.2 Colour Mode) or 0.01 Lux (F1.2 B/W Mode)
  • Two Types of backlight compensation: Multi-Spot and Centre-Zone metering

A two-in-one solution: a colour camera during the day, a high-sensitivity B/W camera during the night.
A colour camera, which captures objects in vivid colours in day-light, becomes a high-sensitivity B/W camera during the night and provides tiny details even in dark corners. A day/night camera is a two-in-one solution.

Multi-spot metering system:

Luminance is measured in 64 separate areas for optimum backlight compensation even for peripheral and moving objects; features selectable normal and high modes.

Centre-Zone metering system:

Luminance measured at centre and automatic lens aperture adjustment enable a clear image even when backlit.

Specification

Scanning SystemPAL Standard 625 lines, 50 fields/sec
Image Sensor1/3’ (approx 4.8mm x 3.6mm) interline transfer method CCD
Number of PixelsTotal: 795 (H) x 596 (V), effective 752 (H) x 582 (V)
Horizontal resolutionMore than 520 TV Lines
Minimum Illumination50IRE 0.01 lux (F1.2, Gain high, B/W model/0.45 lux (F1.2, Gain High, colour model)
20IRE 0.004 lux (F1.2, Gain high, B/W model/0.18 lux(F1.2, Gain High, colour model)
Video Output1.0 V (P-P)75 ohms, composite
Video S/N RatioMore than 50 dB (AGC off)
Backlight CompensationON/OFF – Slide SW (side) ON – Multi-spot metering (64 sections)/Centre-zone metering (activated when auto iris lens used)
White BalanceATW/MANUAL – Slide SW (side)
Gain ControlNormal/High – Slide SW (side)
Gamma0.45
Light ControlOptical auto iris lens/Electronic iris (indoor use)
Lens mountCS mount (C mount: using C mount adaptor supplied)
Flange back12.5mm 0.5mm adjustment
Auto iris lensDC Only
Auto iris outputDC: Drive coil (+, -) Brake (Damp) Coil (+, -)
Lens iris rangeLEVEL: L to H – VR (side)
Electonic Iris Range0.6 lux to 30,000 lux (F1.2 lens: colour mode)
Electronic shutter0.9 lux to 45,000 lux (F1.4 lens: colour mode)
Aperture compensationSharp/Normal
Synchronizing systemInternal sync/Line-lock
Day/night modeAuto (high/low), manual (at control terminal)
Terminals Video signalVIDEO OUT – BNC
Auto iris lensLENS – 4 pin (side)
Power Supply24V AC, GND – 3 pin terminal (rear), 12V DC, NC – 3 pin terminal (rear)
ControlB,C,G -3 pin terminal
Environmental Conditions
Operating Storage		Temperature: – 10 to 50°C (+14 to +122°f), humidity: within 90% RH
Temperature: – 20 to 70°C (-4 to +158°f), humidity: within 70% RH
Power Supply12 to 15V DC/24V AC +10% 50Hz
Power consumption (approx)3.7W
Camera mount1/4′ – 20 UNC (top/bottom selectable)
Dimensions (approx)2.64 (W) x 2.13 (H) x 6.04 (D) (in)
Weight (approx)400g (without lens)