Silvernet Sprint 5Ghz
The Sprint 5Ghz is a wireless outdoor bridge that has been optimised for distances upto 3 km, it works at 5Ghz and is compatible with the 802.11a standard. With its high throughput and long distance transmission it makes it the best solution for carriers, service providers and enterprises. As an outdoor remote client, the Spring 5Ghz can help integrators easily build up a broadband access system.
The Sprint 5Ghz also supports a variety of security features such as WEP, TKIP, AES, recive and transmit filtering, error recovery, quality of service as well as IEEE802.1x standard, thus providing security to the wireless network and increase WLAN performance.
The Sprint 5Ghz is an ideal low cost solution for short range point to point or multi-point links and has a built-in 14.6dBi antenna.
Easy Configuration - Supplied as pre-configured pairs so that all you need to do is power them up.
Simple Network Structure - Easy to install, Power over Ethernet functionality requires only a single ethernet cable between the LAN and the Sprint 5Ghz for sufficient power.
|Transmission rate||54 48 36 24 18 12 9 6 Mbps|
|Operating Mode||AP, AP Client, and Bridge|
|Other wireless||Enable/Disable broadcast SSID|
|Standards||IEEE802.11a, IEEE802.3u, IEEE802.3af|
|WEP Encryption||64/128/152 bits|
|Radius||Supports radius client|
|802.1x||Supports 801.1x client and server|
|WPA||Wi-Fi protected access (EAP, TKIP)|
|SSID||Support enable/disable broadcast|
|MAC||Supports MAC address filtering|
|Gain||14 + 0.5 dBi|
|HPBW/Horizontal/Vertical||35º x 35º|
|Front to back ratio||20dB|
|Max-bandwidth||Full: 100 Mbps (100 base), 10 Mbps (10 base)|
|LAN/WAN||Dual 10/100 Base-T (RJ-45) LAN port (with auto MDI/MDIX)|
|Power||DC 12 ~ 48 Volt or PoE|
|Channel||Europe (ETSI): 5.47 Ghz ~ 5.850 Ghz|
|RF output power||17dBm Max from port|
|Sensitivity||-70dBm @ 54 Mbps|
|Dust and Waterproof||IP65 certified|
|Dimensions||28.8 x 27.5 x 11 (cm)|
|Firmware||Upgradeable via web|
|Operating Temperature||-20ºC to 70ºC|