Call Sales Free: 0800 9882434
Home » Products » CCTV Security Systems » Sanyo Fast Shutter Camera

Enter your details to speak to a member of our sales team.

AlertSystems will always respect your privacy.

Sanyo 1/3" Colour CCD DSP Day/Night Camera

CCTV surveillance solution for recording vehicle movement through gates & barriers. Colour camera during the day, a high sensitivity B/W camera during the night. 

Key features:
  1. 1/3 inch CCD image sensor with approx 470,000 picture elements
  2. Super-high horizontal resolution of 540 TV lines (typical)
  3. Auto-tracing or manual white balance selectable (slide sw)
  4. Built-in high speed electronic shutter
  5. Internal synchronisation, line-lock capability
  6. Built-in electronic iris for indoor use
  7. High sensitivity – minimum illumination of 0.45 lx (F1.2, colour mode) or 0.01 lx (F1.2 B/W mode)
  8. New built-in DSP (digital signal processing) circuitry delivers superior colour reproduction and reduced noise
  9. Two types of backlight compensation: multi spot and centre zone metering
 Sanyo Fast Shutter Static Camera
A two-in-one solution: a colour camera during the day, a high sensitivity B/W camera during the night.
A colour camera, which captures objects in vivid colours in day light, becomes a high-sensitivity B/W camera during the night and provides tiny details even in dark corners. A day/night camera is a two-in-one solution.
Specification
Scanning System PAL Standard 625 lines, 50 fields/sec
Image Sensor 1/3’ (approx 4.8mm x 3.6mm) interline transfer method CCD
Number of Pixels Total: 795 (H) x 596 (V), effective 752 (H) x 582 (V)
Horizontal resolution  540 TV Lines (Typical)
Minimum Illumination

50IRE 0.01 lux (F1.2, Gain high, B/W model/0.45 lux (F1.2, Gain High, colour model)
20IRE 0.004 lux (F1.2, Gain high, B/W model/0.18 lux (F1.2, Gain High, colour model)
Video Output 1.0 V (P-P)75 ohms, composite
Video S/N Ratio More than 50 dB (AGC off)
Backlight Compensation ON/OFF – Slide SW (side) ON – Multi spot metering (64 section)/Centre-zone metering (activated when auto iris lens used)
White Balance ATW/MANUAL – Slide SW (side)
Gain Control Normal/High – Slide SW (side)
Gamma 0.45
Light Control Optical auto iris lens/Electronic iris (indoor use)
Lens mount CS mount (C mount: using C mount adaptor supplied)
Flange back 12.5mm 0.5mm adjustment
Auto iris lens DC Only
Auto iris output DC: Drive coil (+, -) Brake (Damp) Coil (+, -)
Lens iris range LEVEL: L to H – VR (side)
Electonic Iris Range 0.6 lux to 30,000 lux (F1.2 lens: colour mode)
Electronic shutter 0.9 lux to 45,000 lux (F1.4 lens: colour mode)
Aperture compensation Sharp/Normal
Synchronizing system Internal sync/Line-lock
Day/night mode Auto (high/low), manual (at control terminal)
Terminals Video signal VIDEO OUT - BNC
Auto iris lens LENS – 4 pin (side)
Power Supply 24V AC, GND – 3 pin terminal (rear), 12V DC, NC – 3 pin terminal (rear)
Control  B,C,G -3 pin terminal
Environmental Conditions Operating Storage Temperature: - 10 to 50°C (+14 to +122°f), humidity: within 90% RH
Temperature: - 20 to 70°C (-4 to +158°f), humidity: within 70% RH
Power Supply  12 to 15V DC/24V AC +10% 50Hz
Power consumption (approx)  3.7W
Camera mount  1/4' – 20 UNC (top/bottom selectable)
Dimensions (approx)  67 (w) x 54 (h) x 128 (d) mm (2.64 (w) x 2.13 (h) x 6.04 (d)
Weight (approx)  400g (without lens)