Call Sales Free: 0800 9882434
Home » Products » CCTV Security Systems » Bosch Encoder

Enter your details to speak to a member of our sales team.

AlertSystems will always respect your privacy.

Bosch Video Jet X10/X20/X40 Video Encoder

 

Key features:
  1. Ruggedized for extended environmental conditions
  2. High-quality MPEG4 video over IP
  3. Units with one, two, or four video inputs
  4. Built-in Intelligence-at-the-Edge
  5. Network-attached RAID5 storage via iSCSI

Bosch Video Jet X Encoder

The Bosch VideoJet X encoders belong to a family of industrial, high-performance, single, dual, or quad input CCTV video encoders. They are built into a rugged housing and constructed to withstand extreme environmental conditions. The VideoJet X encoders may be used at extreme temperatures, operating from -30 °C to + 60 °C (-22 °F to +140 °F). These powerful and flexible devices represent the cutting edge of high performance video over IP for CCTV today.

VideoJet X encoders are ideal for outdoor applications such as perimeter, border and fence control, as well as for industrial applications where they are tolerant of harsh environments. When used at remote locations you benefit from their wide 10 to 30 VDC power input range, so that they can be battery or solar powered. You also benefit from their SFP slot that allows a direct connection to a fiber interface module without the need for external fiber hardware. Their industrial-grade vibration resistance makes these encoders extremely suitable for use in mobile applications such as trains, busses or other vehicles.
View the VideoJet X encoder video on a PC using a Web browser, VIDOS, in the Bosch Video Management System, or integrate it into another video management system. By routing the IP video to a high performance VIP XD video decoder or a VIDOS Monitor Wall, you can present the video with ultimate clarity.
The encoders feature a highly flexible recording scheduler, providing up to ten programmable recording profiles and allowing individually assigned camera profiles. With these profiles, you can accelerate the frame rate as well as increase the resolution on alarm, saving recording space during non alarm periods.
SPECIFICATION  
Electrical  
Power Supply Stand-alone, exclusive, or external battery
Input Voltage 10 to 30 VDC
Power consumption
 
X10: approx. 16 VA, fully equipped
X20/X40: approx 22 VA, fully equipped
Video  
Video Compression MPEG4, MJPEG, JPEG
Video data rate  9.6 kbps to 6 Mbps per channel
Video resolution and frame (PAL/NTSC)





 
4CIF (704 x 576/480), 25/30 ips
4CIF (704 x 576/480), 12.5/15 ips (4 inputs used)
2CIF (704 x 288/240), 25/30 ips
2/3 D1 (464 x 576/480), 25/30 ips
1/2 D1 (352 x 576/480), 25/30 ips
CIF (352 x 288/240), 25/30 ips
QCIF (176 x 144/120), 25/30 ips
GOP structure I, IP
Overall delay 120 ms
Video in



 
VideoJet X10: 1x BNC connector
VideoJet X20: 2x BNC connectors
VideoJet X40: 4x BNC connectors
Analog composite (NTSC or PAL)
75 Ohm switchable, 0.7 to 1.2 Vpp
Audio  
Audio standard G.711; 300 Hz to 3.4 kHz
Audio data rate 80 kbps at 8 kHz Sampling Rate
Line in
 
Dual channel via 3.5 mm stereo jack, 9 kOhm typical, 5.5 Vpp max. (mono only for X10)
Line out
 
Mono line output on 3.5 mm stereo jack, 3.0 Vpp at 10 kOhm / 1.7 Vpp at 16 Ohm typical
Network  
Ethernet Dual port 10/100 Base-T, auto-sensing, half/full duplex, RJ45
Protocols
 
RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS, IGMP V2/V3, ICMP, ARP, SNTP, SNMP (V1/V2c/V3 MIB-II)
Encryption TLS 1.0, SSL, AES (optional)
Control  
Software update Flash ROM, remote programmable
Configuration Configuration Manager or Web browser
RAM Recording 32 MB total, 8 MB per channel
Connections  
SFP 1x1 Gbps SFP slot for optional standard SFP GBIC module
CompactFlash 1 x CF slot for optional standard Type I/II CompactFlash memory card
USB port USB 2.0 high-speed port, 2.5 W max feed (future use)
Alarm in
 
4x (non-isolated closure contact type), max. activation resistance 10 Ohm, 6 spring clamp contacts
Relay out 4x, 30 Vpp, 2 A, 8 spring clamp contacts
COM port 1x RS232/422/485, 6 spring clamp contacts
Mechanical  
Dimensions (H x W x D) 61 x 178 x 160 mm (2.4 x 7.01 x 6.3 in)
Environmental  
Operating temperature 20 to 80% atmospheric humidity, non-condensing
Relative humidity 0 to 95% atmospheric humidity, non-condensing
Heat value 82 BTU/h max