Universal Proximity Reader

The Universal Proximity Reader is suitable to use with most access control systems providing they accept a clock and data input, aswell as PAC controllers that use a single signal wire. The reader can read the token when it is held in close proximity of the reader. When the reader has been read it sends the data to the control unit and depending on the wiring configuration the Red, Green or Amber LED's can be used to indicate whether a card is valid or invalid.

Key Features:

Use with Paxton Access Net2 and other access control systems
Clock and data output
Low profile - less than 16mm deep
IPX7 rated - suitable for external use
Reads multiple technologies, Hitag2, EM4100 and PAC

Paxton Access Universal Proximity Reader

Specification	Min	Typ	Max	Units
Electrical
Operating voltage	8	12	14	V.d.c
Current consumption	50		120	mA
Carrier frequency		153		kHz
Clock & data bit period		600		µs
System Specification
Cable type for extensions		Beldon 9540
Maximum cable extension length			100	m
Read range: Keyfob			40	mm
Read range: Token/ISO card			60	mm
Read range: Watchpro			30	mm
Additional coloured covers available		Yes
Environment
Operating temperature	-20		55	ºC
Maximum resistant		IPX7
Vandal resistant		Medium
Dimensions
Cable Length		5		m
Width		38		mm
Height		78		mm
Depth		27		mm

Friend's Name: *	Friend's Email : *
Your Name: *	Your Email : *