BT Redcare Secure

BT Redcare Secure comprises of three variants - Secure 2, Secure 3 and Secure IP. All three variants protect customers with a dual path high security signalling device.

Key Features: 24/7 support 3 in 1 21CN compliant Futured proof Dual signalling

24/7 support A team of skilled BT Redcare technicians are on hand 24 hours a day, 365 days a year.
3 in 1 There are 3 variants to choose from - whether you choose Secure 2, 3 or IP you can change options should the business need too.
21CN compliant BT Redcare Secure is a suite of security solutions that looks to the future, not to the past. They meet the highest industry security requirements (AC PO and British/ European standards) and as with all Redcare products, the new portfolio is 21st Century Network compliant meaning your product will continue to work in the 21CN environment.
Future Proofed By choosing a BT Redcare Secure solution you will be securing your business for the future, as well as the present. Should your business risk or future technology change, your Secure solution can be adapted to meet your new requirements.
Dual signalling BT Redcare’s dual signaling approach allows a ‘confirmed activation’ to be sent to your alarm receiving centre, even if your telephone line has been attacked.

PRODUCT SPECIFICATIONS
Signalling Details			Wireless connection via 24/7 VPN over GPRS
			Landline signalling via VPN dial-up session on any PSTN connection
			Continously polled IP path when used in IP mode
			Dual band (900/1800 Mhz)
			Alarm messages and polling are highly encrypted to EN Grade 4
			Software and firmware anti-substitution measure to EN Grade 4
			End-to-end alarm acknowledgement from ARC to alarm panel
			Alarm panel connection monitoring for Dial Capture
			Unit and service faults are self-reported
			Full integration with BT Redcare ARC gateway
Management Features			Remote testing, polling, status and configuration as per BT Redcare protocol
			Simplified installation and service activation
			Remote software download via GPRS (Redcare controlled)
Alarm Panel Interfaces			Dial capture and phone line simulation
			Relay to allow panel PSTN upload/download in dial capture
			Sixteen pins
Secure Unit			Optional mounting in secure wall fitting or within alarm panel
			GSM antenna connection MMCX
			Simple two wire connection to PSTN line, no block or exchange work required
			High performance aerial included
			Ambient temperature: -5°C (23F) to +55ºC (131F)
			Humidity: 5% to 95%
Power Specifications			Nominal 13.5V input (9.5V to 30V)
			Screw terminals
			Low battery alarm reporting to ARC
			Average 230 mA, peak 280 mA (peak 450 mA if using dial capture)
Inputs and Outputs			Sixteen general purpose alarm inputs(logic high =+3.5V-+30V Logic Low =0.5V-+0.8V)
			Unconnected state: Logic Low
			Screw terminals
			Line Fault Output - for status indication at site of alarm signalling paths
			Return path signalling - for confirmation at site of opening and closing
			Control Output - for remote control of site devices
Dial Capture Features			Converts dialler systems into high security signalling devices
			Alarm panel intercfaces supports; Ademco Contact ID, Ademco Hi Speed, Ademco 4+1, Ademco 4+2, SIA1/2/3
Status Indicators			Wireline up
			Wireless up
			Wireless signal strength indicators
			Power
Size & Weight			168 x 115 x 36 mm
			500g
Configuration			DTMF via phone handset
			Alarm PIN self learning
			Laptop programming
Included with Unit			Adhesive pads
			Antenna
Compliant			PD662: 2004 Scheme for EN Standards in I&HAS
			EN50131-1: Alarm Systems, Intrusion Systems
			EN Security standards, Environmental class II
			Compliant for interface to Fire Alarm panels
			BT 21CN Compliant
			Ren value 0.1

Friend's Name: *	Friend's Email : *
Your Name: *	Your Email : *