Home » Products » Access Control » Nano ACU

Please complete the form to email a friend with a link this web page.

Please enter the verification code below:

verification code

*

Page URL to be sent:
http://www.alertsystems.co.uk/net-2-nano-access-control-unit

* Required

Net 2 Nano Access Control Unit

The Net2 Nano Control Unit uses Pacton Access' proprietary and secure wireless technology to connect to the central adminsitration PC. It is ideal where wiring is difficult and can be mixed with the Net 2 Classic and Plus Control Units. 

Key Features:

  1. Uses data encrypted wireless technology
  2. No wiring needed between the control unit and PC
  3. Diagnostic LED's
  4. Colour coded wiring labels
  5. Net2 Plus, Net2 Classic and Net2 Nano control units can be mixed on site
  6. Dedicated lock output
  7. Distributed intelligence
  8. Event buffering
Paxton Access Net2 Nano Access Control Unit 

 

Specification Min Typ Max Units
Electrical        
Operating voltage 11 12 14.5 V.d.c
Current consumption     120 mA
Switchable current     2 A
Switchable voltage      24  V.d.c
Dedicated lock output current
    1.1 
Alarm output current    1000   mA
System Specification        
Number of codes     50  
Code length 4   8 Digits
PIN length     4 Digits
Number of card holders     10000  
Readers/keypads per door   1 2 Per port
Door open time 1 7 99999 Sec
Time zones     64  
Individual times within a time zone 1   2000  
Number of events stored on ACU     6000  
Data retention during power loss   60   (days)
Can be used with fail OPEN release   Yes    
Can be used with fail CLOSED release   Yes    
Exit button input   Yes    
Door contact input   Yes    
Alarm/bell output   Yes    
Relay outputs   1    
PSU monitoring input   Yes    
Tamper input   Yes    
Wiring        
Reader cable type   Beldon 9540    
Maximum number of ACUs per comport/dataline     10  
Dimensions        
Width   84   mm
Height   106   mm
Depth   15   mm

 

 

Killerbytedesign Valid XHTML & CSS