Home » Products » Access Control » Classic ACU
Email
Please complete the form to email a friend with a link this web page.
Net 2 Classic Access Control Unit
| The Classic Control Unit has a flash memory which means that the firmware can be upgraded from the PC. Control units connect together in a 'daisy chain' dataline to form a network. |
|
Key Features:
|
 |
| Specification | Min | Typ | Max | Units |
| Electrical | ||||
| Operating voltage | 11 | 12 | 14 | V.d.c |
| Current consumption | 350 | mA | ||
| Switchable current | 4 | A | ||
| Switchable voltage | 24 | V.d.c | ||
| Alarm output current | 1000 | mA | ||
| ACU input current limit (at full load) | 3 | A | ||
| System Specification | ||||
| Number of codes | 50 | |||
| Code length | 4 | 8 | Digits | |
| PIN length | 4 | Digits | ||
| Number of card holders | 10000 | |||
| Readers/keypads per door | 2 | Per port | ||
| Door open time | 1 | 7 | 999999 | Sec |
| Time zones | 64 | |||
| Individual times within a time zone | 1 | 2000 | ||
| Number of events stored on ACU | 2454 | |||
| Data retention during power loss | 1 | (days) | ||
| Can be used with fail OPEN release | Yes | |||
| Can be used with fail CLOSED release | Yes | |||
| Exit button input | Yes | |||
| Door contact input | Yes | |||
| Alarm/bell output | Yes | |||
| Relay outputs | 2 | |||
| PSU monitoring input | Yes | |||
| Tamper input | Yes | |||
| Wiring | ||||
| Reader cable type | Beldon 9540 | |||
| Network cable type | CAT5 or Beldon 8723 | |||
| Maximum dataline length |
1000 | m | ||
| Maximum number of ACU's per comport/dataline | 200 | |||
| TCP/IP | Yes (max 50) | |||
| Modem | Yes | |||
| Dimensions | ||||
| Width | 102 | |||
| Height | 116 | |||
| Depth | 30 |