Home » Products » Access Control » i Evo reader
Email
Please complete the form to email a friend with a link this web page.
i Evo Biometric Reader
| Ievo has been designed after many years of research from a team of professionals who have been at the sharp end of biometric deployment, installation and integration. This wealth of knowledge has been obtained from not only our own experiences with the shortfalls of existing technologies, but also obtaining feedback from installers and end users. |
|
Key Features:
|
 |
| Biometrics has proven time and time again to overcome all of the security issues that card and fob systems have, however, the cost of biometric systems coupled with the reliability issues have curtailed profits and industry growth. Ievo eradicates all of the existing issues and offers a quick, simple and cost effective resolve. Ievo has been designed to seamlessly integrate into existing card and fob systems by utilising the original manufacturers controllers through the use of wiegand inputs. Ievo has combined many unique features offering a large number of outcomes and benefits. Ievo uses multi-spectral imaging combined with a superior award winning algorithm offering a system that will work in very hard environments even with problem fingerprints. Minimalistic in design Ievo researched with end users, installers and architects and found the consensus to be that a reader should be small in size to fit in with the environment it is to be placed. An access control product that is placed next to a door is always a concern. Couple this with the DDA requirements and a larger unit can be obstructive and has limited applications. User friendly Ievo is quick, clean and an efficient access control reader which increases footfall, a must for all access control systems. Vandal resistant The ievo reader has no screen which is the easiest part of any reader to vandalise, it has no keypad which is also another area of concern. The ievo case is manufactured in a polycarb ABS mix offering both flexibility and rigidity. Waterproof IP rated Ievo is IP rated to industry standard 65, offering a reader that can be mounted internally or externally without compromising its efficiency or reliability. Flush or Surface mounted The ievo reader can be flush or surface mounted offering the desired requirements for the aesthetics of its environment. Multi spectral imaging sensor The ievo sensor technology will obtain the finger print image through water, dust, dirt, oils, creams and even some latex gloves. An IP rated case enables ievo to be used in the harshest of environments. Internal or external use The ievo reader comes in four choices for specification. An internal flush or surface mounted, or an external flush or surface mounted with a built in heater system which enables the reader to operate at -20°C. The ievo external reader does not have to be mounted in a case or box like other leading biometric manufacturers. Integrates into existing card, fob & prox systems Ievo has been designed to seamlessly integrate into existing card and fob systems by utilising the original manufacturers controllers through the use of wiegand inputs and outputs. Ievo offers installers the opportunity to offer a reliable and superior biometric product to all of its new and existing clients. Reader holds no data. PCB is housed internally Most competitor biometric access control products have built in controller/relays. These can be easily removed from the wall and gain entrance by shorting the relay. Can be manufactured in any custom colour By simply providing ievo a colour RAL number we can supply you with the required number of readers to exactly match your colour. This has proven to be essential when specifying into new builds with corporate colour requirements. Easy to use interface Software A well communicated issue with existing biometric products and its software is due to the duplication of registration information when integrating the reader into existing systems. Ievo eradicates these issues and its software is not only effortless but is very quick and easy to use and compliments any existing software. |
|
Features and Specifications |
|
| CPU | ARM9 |
| Memory | RAM 16MB Flash 32MB |
| FRR | <0.1% |
| FAR | <0.00001% |
| Indentication Speed | <0.7 sec |
| Template Capacity | 1:N 8000 |
| Log Capacity | 200 |
| Voltage | 12V DC |
| Current Draw | <500 mA |
| Output | Wiegand |
| Communication | TCP/IP IEVO/Controller OEM Dependent |
| Operating Temperature | -20 ~ 70 ºC (-4 ~ 158 ºF) |
| IP Rating | IP 65 |
| Power Indication | LED in Piezo Button |
| Certifications | CE FCC (applied) RoHS |
| Dimensions |
Surface: W 76mm H 137mm D 91mm Flush: W 119mm H 137mm Total D: 91mm Visual D: 45.5mm |