Home » Products » CCTV » Edge 1 Encoder/Decoder

Please complete the form to email a friend with a link this web page.

Please enter the verification code below:

verification code

*

Page URL to be sent:
http://www.alertsystems.co.uk/codec

* Required

March Networks (Cieffe Nettuno) Edge 1 Encoder/Decoder

Key features:
  1. Standalone form factor
  2. 4 simultaneous H.264 or MPEG-4 streams
  3. Up to 30 fps NTSC / 25 fps PAL @ D1
  4. Power over Ethernet
  5. Alarm input and relay
  6. Optional PTZ and audio capabilities
  7. Support for a range of embedded video analytics
March Networks Video Shere Edge 1 Encoder/Decoder
VideoSphere™ Edge Encoders and Decoders from March Networks® integrate analog video cameras into an IP network, and manage the decoding and display of all video streams. The units enable organizations to leverage existing investments in analog cameras and cabling and migrate to all-IP video networking cost-effectively.
The Edge encoders work in concert with VideoSphere Video Management System (VMS) software running on industry-standard servers to archive all video, audio and data evidence. The architecture enables easy deployment of advanced video analytics and other industry specific business intelligence applications.
VideoSphere encoders use H.264 or MPEG4 compression to consolidate and convert video from analog cameras onto a standard IP network. Organizations with large facilities can deploy VideoSphere Edge encoders to leverage cost-effective analog technology, and to replace lengthy coaxial cable runs with a single network connection, saving an organization as much as 30% in labor and cabling costs.
Specification
  Encoder/Decoder
Frame Rate 30fps (NTSC) / 25 fps (PAL) @ D1 
Form Factor Standalone 
Video Output BNC Loopthrough/Monitor out 
Audio Inputs/Outputs 1/1 
Alarms
Relays
Compression 4 simultaneous H.264 MPEG-4 streams 

Supported Resolutions

CIF, 2CIF, D1
Embedded Analytics Optional 
PTZ Control 1 x RS-485 
Ethernet 10/100 Mbps 
Internal Storage SD Card Slot 
Power over Ethernet (PoE) Yes 
Power Supply 12 VDC (terminal) PoE 
Power Consumption 4 W 
Mounting Options Wall mount or rack mount (1U, 4 slots) 
Operating temperature 40º - 130 º F / 5º to 55º C
Shipping Weight 1.1lbs / 0.5 Kg 
Dimensions (HxWxD) 1.4 x 4.5 x 4.75 in / 3.5 x 11.4 x 12 cm 
Standards Compliance UL 609050; CE EN55022; RoHS 2000/95/EC 

Killerbytedesign Valid XHTML & CSS