Bosch Video Jet X10/X20/X40 SN Video Encoder

Key features: High quality MPEG-4 video over IP Units with one, two, or four video inputs Built-in intelligence at the edge Network attached RAID storage via iSCSI Local recording on CF card or USB hard drive

The Bosch Video Jet X SN encoders belong to a family of high performance, single, dual, or quad input CCTV video encoders that feature DVD-like quality MPEG-4 video, at up to 30 images per second, over IP networks. The units support Pal/NTSC sources and provide bi-directional audio communication in parallel to video. They are built into a housing that can be easily wall-mounted or rack-mounted. These powerful and flexible devices represent the cutting edge of high performance video over IP for CCTV today.
View the VideoJet X SN encoder video on a PC sing a Web Browser, in the Bosch Video Management system, or integrate it into another video management system. By routing the IP video to a high performance VIP XD video decoder or a VIDOS monitor wall, you can present the video with ultimate clarity.
When one or two inputs are used, the encoders deliver MPEG-4 video over IP at a full frame rate of 25 (PAL) or 30 (NTSC) images per second with up to 4CIF resolution on every channel. If four inputs are used, the maximumframe rate is 12.5/15 images per second at 4CIF resolution and no dual streaming is possible.
With built-in video content analysis, Video Jet X SN encoders reinforce the intelligence at the edge concept where edge devices become increasingly intelligent. The Video Jet X SN comes with built-in motion detection This motion detection algorithm is based on pixel change and includes object size filtering capabilities and sophisticated tamper detection capabilities.

SPECIFICATION
Electrical
Power Supply			Via external unit or external battery
Input Voltage			10 to 30 VDC
Power consumption			X10: approx 11 VA, fully equipped X20/X40: approx 19 VA, fully equipped
Input/Output
Video			X10: 1 x input X20: 2 x input X40: 4 x input
Connector			BNC
Impedance			75 ohm, switchable
Signal			Analog composite, 0.7 to 1.2 Vpp, NTSC or PAl
Audio			X10: 1 x mono line in, 1 x mono line out X20/X40: 2 x mono line in, 1 x mono line out
Connector			2 x 3.5 mm stereo jack
Signal line in			9 kohm typical, 5.5 Vpp max
Signal line out			3.0 Vpp at 10 kohm/1.7 Vpp at 16 ohm typical
Alarm			4 x input
Connector			Clamp (non-isolated closing contact)
Activation resistance			10 ohm max
Relay			4 x output
Connector			Clamp
Signal			30 Vpp, 2A
COM port			Clamp, RS-232/422/485
Video
Standards			MPEG-4, M-JPEG, JPEG
Data rates			9.6 kbps to 6 mbps per channel
Resolution			Horizontal x vertical PAL/NTSC
4CIF			X10/X20: 704x576/480 (25/30 ips)* X40: 704x576/480 (12.5/15 ips* all inputs used)
2CIF			704x288/240 (25/30 ips)*
2/3 D1			464x576/480 (25/30 ips)*
1/2 D1			352x576/480 (25 ips)*
QCIF			176x144/120 (25/30 ips)* *Depending on picture and movement
GOP structure			I, IP
Overall IP delay			120ms
Frame rate			1 to 50/60 (PAL/NTSC)
Audio
Standard			G.711; 300 Hz to 3.4 Hz
Data rate			80 kbps at 8 kHz sampling rate
Network
Ethernet			10/100 Base-T, auto-sensing, half/full duplex, RJ45
Protocols			RTP, Telnet, USP, TCP, IP, HTTP, HTTPS, DHCP, IGMP V2/V3, ICMP, ARP, RTSP, SMTP, SNTP, SNMP (V1/V2c/V3 MIB-II), 802.1x
Encryption			TLS 1.0, SSL, AES (optional)
Control
Software update			Flash ROM, remote programmable
Configuration			Configuration manager or web browser
Connections
Compact Flash			1 x CF slot for optional standard Type I/II Compact Flash memory card
USB port			1 x USB 2.0 high-speed port, 2.5 W max feed
Mechanical
Dimensions (HxWxD)			33x142x178 mm (1.3x5.6x7in)
Weight			Approx 0.6 kg (1.3 lbs)
Environmental
Operating temperature			0ºC to +50ºC (32ºF to 122ºF) ambient temperature
Relative humidity			20 to 80% atmospheric humidity, non condensing
Thermal value			X10: 37 BTU/h max, fully equipped X20/40: 65 BTU/h max, fully equipped

Friend's Name: *	Friend's Email : *
Your Name: *	Your Email : *