Archive for the ‘Security Issues’ Category

Lead Theft Should Not Be A Soft Option For Thieves

Monday, November 28th, 2011

As the scrap value of lead continues to increase, those responsible churches are being encouraged to improve their security measures as the recession drives incidents of metal theft to a record high.

The security industry and the Lead Sheet Association (LSA) have teamed up to provide some practical advice on protecting churches and faith buildings this winter.

With churchyards often secluded or left unattended for long hours, both day and night, churches are often seen as ‘easy pickings’ for thieves, who steal valuable lead from church roofs to sell on at a high price. The impact of the recession has, of course, resulted in an increase in such crime.

Low budgets and poor security measures are two main factors exposing churches to the risk of metal theft. While the cost of installing security measures is sometimes seen as a ‘luxury’ expense, making uninformed decisions when sourcing security can often lead to costly repercussions in the long run. As technology continues to develop at a rapid pace, there are now plenty of low budget, yet highly effective products and services on the market to help protect cost-conscious churches.

The impact of lead theft has far-reaching consequences for churches. Aside from the obvious damage to the roof, damage can also be caused to joists and timbers, as well as to the many valuable internal furnishings that are left exposed to the elements as a result.

Regular use of the buildings may also be interrupted, with scheduled weddings, funerals and regular services often affected, driving the true cost of lead theft even higher.

Simple security measures such as CCTV, perimeter protection, motion detection and property marking solutions can all be used either independently or together as an integrated solution to help historic buildings reduce the risk of falling victim to metal theft.

Professional security installers have wide-ranging experience in protecting heritage buildings and churches from lead theft. As an example, recently three Wiltshire churches were secured using an integrated solution comprising both motion detectors and surveillance systems. In this case any incident of attempted theft would be detected immediately. A telephone system operating wirelessly with a SIM card will call to ten numbers, ensuring that the police and others can be on the scene within minutes.

Forensic property marking solutions are also proving extremely effective in tracing stolen lead. Recently, police in Colchester detained three men after lead marked with a unique solution was found in their vehicle.

Douglas Weston, chief executive of the Lead Sheet Association, explained what makes lead so valuable.

“Lead is the most recycled and recovered building material in use today,” he said. “It will last longer and age more beautifully then any of its synthetically-produced substitutes, which can be known to fail within 20 years. With its low melting point and CO2 emissions, lead is a very green, environmentally-friendly product as far as production is concerned. It will outlast any alternative building materials making it best value, both in monetary and environmental terms.”

Given that many church commissioners are largely unfamiliar with the procurement of security products and services, finding reliable advice from a reputable and accredited supplier is all-important.

A professional installer of security systems will adhere to strict quality standards. With services ranging from CCTV to External Deterrent Systems, there are many easy-to-install and affordable security measures to help prevent lead theft.

Instant Fog

Monday, November 14th, 2011

SmokeCloak are the world largest manufacturers of fog generating security systems and to-date they have over 40,000 units installed in 50 countries.

SmokeCloak provides instant theft and raid protection for ATM’s, Banks, Warehouses, Schools and Jewellers, to name a few.

The system is designed to provide protection in the critical time gap between the alarm activation and the response team’s arrival. Within the seconds the protected area fills with a cloud of fog forcing the intruder out of the premises.

The SmokeCloak can be integrated into any electronic security system such as CCTV or an Access Control System.

The SmokeCloak Vali generator range features a new patented heat exchanger system that transfers heat directly to the FL600-V fog fluid.  The firing is explosive and the fog is distributed instantly.

The SmokeCloak fluid retains its long lasting dry and dense fog characteristics and because of this the Vali is able to achieve immediate protection with a long lasting effect.

This new range from SmokeCloak features a new nozzle system. The systems comes with a choice of three nozzles and these give users the possibility to make directional firing even easier.  The core of the unique SmokeCloak VALI Range is its patented and revolutionary heat exchanger system, which transfers heat directly to the fluid. Historically the heat exchanger has been the heaviest component in the fog generator, but with the new design the weight has been reduced by 12 kg compared to former product generations.

The patented re-activation system – Cloaksensor – automatically ensures an ideal fog density in the room until the alarm is re-set. The optical sensor constantly measures the fog density and re-activates the SmokeCloak if the fog density is reduced. As long as the fog density is sufficient the SmokeCloak will not re-activate. This saves fluid and prevents over-condensation.

The right amount of fog can easily be adjusted directly on the fog generator or via the newly developed PC program. The program is supplied with the product and can be used on every windows based PC. The PC is easy to connect to the SmokeCloak Vali fog generator via the standard USB cable. The PC tool gives access to a wide range of advanced settings, which enable the user to fully adjust the machine for optimal performance.

The Vali fog generator offers simple and trouble-free installation and has a mounting bracket that enables the unit to be mounted vertically or horizontally.

There are three models n the Vali range, V20 suitable for larger offices and storage areas, V10 for medium sized offices and finally the V5 for areas such as small offices or server rooms.

Killerbytedesign Valid XHTML & CSS | SEO